Ship & Boat ›› 2026, Vol. 37 ›› Issue (04): 1-22.DOI: 10.19423/j.cnki.31-1561/u.2026.099
GAO Yan1,2, SHI Jiawei1, GUO Chunyu1,2,*
Received:2026-06-03
Revised:2026-07-14
Published:2026-08-28
通讯作者:
郭春雨（1981—）,男,博士,教授/博士生导师。研究方向：船舶水下推进理论与试验方法,重点推进节能降噪、极地船舶推进及仿生柔性波动式推进技术。
作者简介:高 岩（1989—）,女,博士,副教授/博士生导师。研究方向：海洋结构物动态响应及破坏机理、海洋可再生能源开发利用; 石家伟（2001—）,男,硕士研究生。研究方向：近场动力学在风机结构裂纹扩展中的应用;郭春雨,教授,博士生导师,国家杰出青年科学基金获得者、某项目首席科学家、2024及2025年度全球前2%顶尖科学家,担任工信部船舶能效提升专项论证组专家及中国造船工程学会船舶力学学术委员会委员等学术职务。多年来,其主要围绕船舶水下推进技术的“节能”“降噪”“极区”中涉及的科学问题开展研究工作,是国际上较早且系统开展船舶水下绕流场理论与实验方法研究的学者,其在船舶推进领域的突出科研贡献,曾被新华网、凤凰网等多家主流媒体深度报道。近年来,其带领团队专注于仿生柔性波动式推进技术及水下智能机器人技术研究,开发“仿生柔性波动式两栖航行器”等创新平台,先后获中国造船工程学会技术发明一等奖、海洋工程技术发明一等奖、山东省青年科技奖等省部级奖励,论著多次入选流体力学顶级期刊《Physics of Fluids》的封面及编辑推荐文章（Feature Article）。
基金资助:CLC Number:
GAO Yan, SHI Jiawei, GUO Chunyu. Application of Peridynamics in Crack Propagation and Structural Analysis of Wind Turbine Blades: A Review[J]. Ship & Boat, 2026, 37(04): 1-22.
高岩, 石家伟, 郭春雨. 近场动力学在风机叶片裂纹扩展及结构分析中的应用综述[J]. 船舶, 2026, 37(04): 1-22.
| [1] Global Wind Energy Council. Global wind report 2025[R]. Lisbon:Global Wind Energy Council,2025. [2] 张建华,王小宇,刘志成,等. 浮式风机平台设计研究综述[J]. 中国舰船研究,2024,19(4):21-31. [3] Veers P,Dykes K,Lantz E,et al. Grand challenges in the science of wind energy[J]. Science,2019,366(6464):eaau2027. [4] 胡燕平,戴巨川,刘德顺. 大型风力机叶片研究现状与发展趋势[J]. 机械工程学报,2013,49(20):140-151. [5] 李成良,杨超,倪爱清,等. 复合材料在大型风电叶片上的应用与发展[J]. 复合材料学报,2023,40(3):1274-1284. [6] Mishnaevsky L,Branner K,Petersen H N,et al.Materials for wind turbine blades:An overview[J]. Materials,2017,10(11):1285. [7] Chen X,Eder M A.A critical review of damage and failure of composite wind turbine blade structures[C]// IOP Conference Series:Materials Science and Engineering,2020,942:012001. [8] Mishnaevsky L.Root causes and mechanisms of failure of wind turbine blades:Overview[J]. Materials,2022,15(9):2959. [9] Shohag M A S,Hammel E C,Olawale D O,et al. Damage mitigation techniques in wind turbine blades:A review[J]. Wind Engineering,2017,41(3):185-210. [10] 黄吉,王继辉,秦志文,等. GFRP风电叶片段结构强度三维有限元分析[J]. 复合材料学报,2019,36(8):1864-1872. [11] Moës N,Dolbow J,Belytschko T.A finite element method for crack growth without remeshing[J]. International Journal for Numerical Methods in Engineering,1999,46(1):131-150. [12] Camanho P P,Dávila C G,De Moura M F. Numerical simulation of mixed-mode progressive delamination in composite materials[J]. Journal of Composite Materials,2003,37(16):1415-1438. [13] Borden M J,Verhoosel C V,Scott M A,et al. A phase-field description of dynamic brittle fracture[J]. Computer Methods in Applied Mechanics and Engineering,2012,217-220:77-95. [14] Silling S A.Reformulation of elasticity theory for discontinuities and long-range forces[J]. Journal of the Mechanics and Physics of Solids,2000,48(1):175-209. [15] Madenci E,Oterkus E.Peridynamic Theory and Its Applications[M]. New York:Springer,2014. [16] 胡祎乐,余音,汪海. 基于近场动力学理论的层压板损伤分析方法[J]. 力学学报,2013,45(4):624-628. [17] Oterkus E,Madenci E.Peridynamic analysis of fiber-reinforced composite materials[J]. Journal of Mechanics of Materials and Structures,2012,7(1):45-84. [18] Hu W,Ha Y D,Bobaru F.Peridynamic model for dynamic fracture in unidirectional fiber-reinforced composites[J]. Computer Methods in Applied Mechanics and Engineering,2012,217:247-261. [19] Yang X W,Gao W C.An improved peridynamic model for failure analysis of composite laminates[J]. Engineering Fracture Mechanics,2024,295:109815. [20] Yang X W,Gao W C,Liu Z H,et al.Ordinary state-based peridynamic model for out-of-plane deformation and damage analysis of composite laminates[J]. Computer Methods in Applied Mechanics and Engineering,2024,420:116740. [21] Hu Y L,De Carvalho N V,Madenci E. Peridynamic modeling of delamination growth in composite laminates[J]. Composite Structures,2015,132:610-620. [22] Silling S A,Askari A.Peridynamic model for fatigue cracking[R]. Albuquerque:Sandia National Laboratories,2014. [23] Zhang G,Le Q,Bobaru F.Validation of a peridynamic model for fatigue cracking[J]. Engineering Fracture Mechanics,2016,162:76-94. [24] 王富伟,黄再兴. 复合材料层合板冲击损伤近场动力学模型与分析[J]. 计算力学学报,2014,31(6):709-713. [25] 姜晓伟,汪海,朱建辉. 基于能量准则的复合材料层合板低速冲击近场动力学模拟[J]. 复合材料学报,2024,41(4):2126-2136. [26] 唐和生,谢雅娟,陈豪. 基于深度学习和近场动力学的层合板冲击工况识别[J]. 计算力学学报,2023,40(1):52-59. [27] 张恒,张雄,乔丕忠. 近场动力学在断裂力学领域的研究进展[J]. 力学进展,2022,52(4):852-873. [28] 乔丕忠,张勇,张恒,等. 近场动力学研究进展[J]. 力学季刊,2017,38(1):1-13. [29] Ageze M B,Zeleke M A,Miliket T A,et al.Perspectives of peridynamic theory in wind turbines computational modeling[J]. Archives of Computational Methods in Engineering,2025,32:1-33. [30] Silling S A,Askari E.A meshfree method based on the peridynamic model of solid mechanics[J]. Computers & Structures,2005,83(17/18):1526-1535. [31] Trageser J E,Seleson P.Bond-Based peridynamics:a tale of two Poisson’s ratios[J]. Journal of Peridynamics and Nonlocal Modeling,2020,2(3):278-288. [32] Silling S A,Epton M,Weckner O,et al.Peridynamic states and constitutive modeling[J]. Journal of Elasticity,2007,88(2):151-184. [33] Hattori G,Trevelyan J,Coombs W M.A non-ordinary state-based peridynamics framework for anisotropic materials[J]. Computer Methods in Applied Mechanics and Engineering,2018,339:416-442. [34] 黄丹,章青,乔丕忠,等. 近场动力学方法及其应用[J]. 力学进展,2010,40(4):445-452. [35] Silling S A,Lehoucq R B.Convergence of peridynamics to classical elasticity theory[J]. Journal of Elasticity,2008,93(1):13-37. [36] Silling S A,Lehoucq R B.Peridynamic theory of solid mechanics[J]. Advances in Applied Mechanics,2010,44:73-168. [37] Kilic B,Agwai A,Madenci E.Peridynamic theory for progressive damage prediction in center-cracked composite laminates[J]. Composite Structures,2009,90(2):141-151. [38] Hu Y L,Yu Y,Madenci E.Peridynamic modeling of composite laminates with material coupling and transverse shear deformation[J]. Composite Structures,2020,253:112760. [39] Nixon-Pearson O,Greaves P,Mamalis D,et al.Wind turbine blades design and manufacturing literature review[R]. ORE Catapult,2022. [40] 王宝萱,董敏,梁旭,等. 海上风电叶片结构设计中的前沿问题与挑战[J]. 船舶工程,2023,45(11):18-24. [41] Katsaprakakis D A,Papadakis N,Ntintakis I.A comprehensive analysis of wind turbine blade damage[J]. Energies,2021,14(18):5974. [42] Rafiee R,Hashemi-Taheri M R. Failure analysis of a composite wind turbine blade at the adhesive joint of the trailing edge[J]. Engineering Failure Analysis,2021,121:105148. [43] Haselbach P U,Berring P.Spar cap/shear web debonding under fatigue loading studied on the DTU 12.6 m wind turbine blade[J]. Procedia Structural Integrity,2024,57:169-178. [44] 郭帅,焦学健,李丽君,等. 近场动力学方法研究复合材料失效的进展[J]. 材料导报,2019,33(5):826-833. [45] Kashtalyan M,Soutis C.Analysis of composite laminates with intra- and interlaminar damage[J]. Progress in Aerospace Sciences,2005,41(2):152-173. [46] Zhang H,Qiao P Z.A state-based peridynamic model for quantitative elastic and fracture analysis of orthotropic materials[J]. Engineering Fracture Mechanics,2019,206:147-171. [47] Che L,Liu S,Liang J,et al.An improved four-parameter conjugated bond-based peridynamic method for fiber-reinforced composites[J]. Engineering Fracture Mechanics,2022,275:108863. [48] Liu S,Che L,Liang J,et al.A conjugated bond-based peridynamic model for laminated composite materials[J]. International Journal of Mechanical Sciences,2024,265:108893. [49] Hu Y L,Yu Y,Wang H.Peridynamic analytical method for progressive damage in notched composite laminates[J]. Composite Structures,2014,108:801-810. [50] Gui Y J,Yu Y,Hu Y L,et al.A peridynamic cohesive zone model for composite laminates[J]. Journal of Peridynamics and Nonlocal Modeling,2021,3:383-409. [51] Dorduncu M.Peridynamic modeling of delaminations in laminated composite beams using refined zigzag theory[J]. Theoretical and Applied Fracture Mechanics,2021,112:102832. [52] Ren B,Wu C T,Seleson P,et al.An FEM-based peridynamic model for failure analysis of unidirectional fiber-reinforced laminates[J]. Journal of Peridynamics and Nonlocal Modeling,2021,4:1-24. [53] Liu S,Bian Y J,Che L,et al.Element-based peridynamic model for composite laminates[J]. International Journal of Mechanical Sciences,2025,308:110967. [54] Madenci E,Yaghoobi A,Barut A,et al.Peridynamics for failure prediction in variable angle tow composites[J]. Archive of Applied Mechanics,2023,93(1):93-107. [55] 杨方鸿,杜文韬,车路,等. 变角度复合材料单元型近场动力学模型[J]. 复合材料学报,2025,42(8):4804-4814. [56] Qi J Q,Li C,Tie Y,et al.An ordinary state-based peridynamic computational investigation of fiber-reinforced composites[J]. Computational Particle Mechanics,2023,10:777-791. [57] Zhang X K,Gao W C.An arbitrary fiber orientation peridynamic model of composite laminates[J]. Computational Particle Mechanics,2025,12(4):2417-2435. [58] Xin W,Li H,Lu X L,et al.Study on the effect of initial delamination on tensile behavior of offshore wind turbine blade spar cap[J]. Energies,2023,16(8):3607. [59] Li H,Ning W B,Xin W,et al.Study on the delamination damage prediction of wind turbine blade spar cap based on morphology feature recognition[J]. Engineering Failure Analysis,2024,166:108867. [60] Li F S,Gao W C,Liu W,et al.Coupling of single-layer material point peridynamics and finite element method for analyzing the fracture behavior of composite laminates[J]. International Journal of Solids and Structures,2023,283:112495. [61] Yang X W,Gao W C,Liu W,et al.Coupling four-parameters bond-based peridynamic and finite elements for damage analysis of composite structures[J]. Theoretical and Applied Fracture Mechanics,2024,129:104230. [62] 刘占辉,杨雄武,涂博文,等. 近场动力学在层合复合材料强度及损伤问题中的研究进展[J/OL]. 工程力学,2024:1-14[2026-08-09]. https://link.cnki.net/urlid/11.2595.03.20241108.1717.051. [63] Zhang X,Gao F,Yang X.Non-ordinary state-based peridynamic equivalent model for thick composite structures[J]. International Journal of Mechanical Sciences,2025,308:110971. [64] Zhu Z J,Zhang H B,Zhang S,et al.An improved bond-based peridynamic model for out-of-plane deformation and damage analysis of composite laminates[J]. Composite Structures,2025,372:119536. [65] Miao X Y,Johansen N F J,Bangaru A K,et al. Design and testing of an element test specimen for fatigue delamination crack growth initiating at a ply drop[J]. Composites Part B:Engineering,2026,308:112977. [66] Yang N N,Zhao T Y,Gu J G,et al.Damage and fracture analysis of bolted joints of composite materials based on peridynamic theory[J]. Polish Maritime Research,2019,26(2):22-32. [67] Guo S,Tian X Y,Tang Y.Peridynamics-based model of composite lamina with progressive variations in mechanical properties[J]. Materials Today Communications,2024,40:110158. [68] Thomsen O T.Sandwich materials for wind turbine blades-present and future[J]. Journal of Sandwich Structures & Materials,2009,11(1):7-26. [69] 梁小杰. 风电叶片用芯材应用进展[J]. 农业工程,2023,13(10):56-59. [70] Galos J,Das R,Sutcliffe M P F,et al. Review of balsa core sandwich composite structures[J]. Materials & Design,2022,221:111013. [71] 羊森林,贾德壮,李磊,等. 风电叶片夹芯复合材料的结构设计与性能关系[J]. 高分子材料科学与工程,2024,40(11):119-126. [72] Murdy P,Hughes S,Barnes D.Characterization and repair of core gap manufacturing defects for wind turbine blades[J]. Journal of Sandwich Structures & Materials,2022,24:2083-2100. [73] Laustsen S,Lund E,Kühlmeier L,et al.Failure behaviour of grid-scored foam cored composite sandwich panels for wind turbine blades subjected to realistic multiaxial loading conditions[J]. Journal of Sandwich Structures & Materials,2014,16(5):481-510. [74] Yang X,Li F,Tan C,et al.Failure prediction of corrugated sandwich structures based on peridynamics[J]. Computational Particle Mechanics,2025,12(5):4229-4250. [75] Fernandez G,Usabiaga H,Vandepitte D.Subcomponent development for sandwich composite wind turbine blade bonded joints analysis[J]. Composite Structures,2017,180:41-62. [76] Gao Y,Wang T,Luo Y,et al.Peridynamic modelling of crack propagation in sandwich plate used in wind turbine blade[C]//MARSTRUCT 2025,2025. [77] Eder M A,Bitsche R D,Nielsen M,et al.A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades[J]. Wind Energy,2014,17(3):483-497. [78] Ha K,Jeong J.Stress states investigation of adhesive bonded joint between spar cap and shear webs of a large wind turbine rotor blade[J]. Journal of Mechanical Science and Technology,2021,35:2067-2076. [79] Behera D,Roy P,Madenci E.Peridynamic modeling of bonded-lap joints with viscoelastic adhesives in the presence of finite deformation[J]. Computer Methods in Applied Mechanics and Engineering,2021,374:113584. [80] Ma Q,Huang D,Wu L,et al.An extended peridynamic model for analyzing interfacial failure of composite materials with non-uniform discretization[J]. Theoretical and Applied Fracture Mechanics,2023,125:103854. [81] Zhang H,Zhang X,Qiao P.A new peridynamic mixed-mode bond failure model for interface delamination and homogeneous materials fracture analysis[J]. Computer Methods in Applied Mechanics and Engineering,2021,379:113728. [82] Gok E,Yolum U,Guler M A.Mode II and mixed mode delamination growth in composite materials using peridynamic theory[C]// Procedia Structural Integrity,2020,28:2043-2054. [83] Wang J,Huang X,Wei C,et al.Failure analysis at trailing edge of a wind turbine blade through subcomponent test[C]// Engineering Failure Analysis,2021,130:105596. [84] Chen X,Berring P,Madsen S H,et al.Understanding progressive failure mechanisms of a wind turbine blade trailing edge section through subcomponent tests and nonlinear FE analysis[J]. Composite Structures,2019,214:422-438. [85] Wang W,Xue Y,He C,et al.Review of the typical damage and damage-detection methods of large wind turbine blades[J]. Energies,2022,15(15):5672. [86] 孙丽萍,王昊,丁娇娇. 风力发电机叶片的气动弹性及颤振研究综述[J]. 液压与气动,2012(10):1-5. [87] 钱晓航,郜志腾,王同光,等. 百米级大柔性风电叶片非线性气弹响应分析[J]. 空气动力学学报,2022,40(4):220-230. [88] Tamayo-Avendaño J M,Patiño I D,Nieto-Londoño C,et al. Fluid-structure interaction analysis of a wind turbine blade with passive control by bend-twist coupling[J]. Energies,2023,16(18):6619. [89] Huque Z,Zemmouri F,Lu H,et al.Fluid-structure interaction simulations of wind turbine blades with pointed tips[J]. Energies,2024,17(5):1090. [90] Shakya P,Poudyal R,Shahariar G M H,et al. Fluid-structure interaction and life prediction of small-scale damaged horizontal axis wind turbine blades[J]. Results in Engineering,2024,23:102388. [91] Sun W K,Zhang L W,Liew K M.A smoothed particle hydrodynamics-peridynamics coupling strategy for modeling fluid-structure interaction problems[J]. Computer Methods in Applied Mechanics and Engineering,2020,371:113298. [92] Rahimi M N,Kolukisa D C,Yildiz M,et al.A generalized hybrid smoothed particle hydrodynamics-peridynamics algorithm with a novel Lagrangian mapping for solution and failure analysis of fluid-structure interaction problems[J]. Computer Methods in Applied Mechanics and Engineering,2022,389:114370. [93] Sun W K,Zhang L W,Liew K M.A coupled SPH-PD model for fluid-structure interaction in an irregular channel flow considering the structural failure[J]. Computer Methods in Applied Mechanics and Engineering,2022,401:115573. [94] Zhang Y,Haeri S,Pan G,et al.Strongly coupled peridynamic and lattice Boltzmann models using immersed boundary method for flow-induced structural deformation and fracture[J]. Journal of Computational Physics,2021,435:110267. [95] Kim K H,Bhalla A P S,Griffith B E. An immersed peridynamics model of fluid-structure interaction accounting for material damage and failure[J]. Journal of Computational Physics,2023,493:112466. [96] Aceti P,Carminati L,Bettini P,et al.Hygrothermal ageing of composite structures. Part 1:Technical review[J]. Composite Structures,2023,319:117076. [97] Aceti P,Carminati L,Bettini P,et al.Hygrothermal ageing of composite structures. Part 2:Mitigation techniques,detection and removal[J]. Composite Structures,2023,319:117105. [98] Gao Y,Oterkus S.Fully coupled thermomechanical analysis of laminated composites by using ordinary state based peridynamic theory[J]. Composite Structures,2019,207:397-424. [99] Gao Y,Oterkus S.Coupled thermo-fluid-mechanical peridynamic model for analysing composite under fire scenarios[J]. Composite Structures,2021,255:113006. [100] Yang C,Zhu F,Zhao J.A multi-horizon fully coupled thermo-mechanical peridynamics[J]. Journal of the Mechanics and Physics of Solids,2024,191:105758. [101] Sun W K,Yin B B,Akbar A,Kodur V K R,et al. A coupled 3D thermo-mechanical peridynamic model for cracking analysis of homogeneous and heterogeneous materials[J]. Computer Methods in Applied Mechanics and Engineering,2024,418:116577. [102] Wang Y,Zhou X P,Kou M M.An improved coupled thermo-mechanic bond-based peridynamic model for cracking behaviors in brittle solids subjected to thermal shocks[J]. European Journal of Mechanics - A/Solids,2019,73:282-305. [103] Rocha I B C M,Raijmaekers S,Nijssen R P L,et al. Hygrothermal ageing behaviour of a glass/epoxy composite used in wind turbine blades[J]. Composite Structures,2017,174:110-122. [104] Mamalis D,Floreani C,Ó Brádaigh C M. Influence of hygrothermal ageing on the mechanical properties of unidirectional carbon fibre reinforced powder epoxy composites[J]. Composites Part B:Engineering,2021,225:109281. [105] Aliheidari N,Ameli A.Hygrothermal aging of structural epoxy adhesives used in wind turbine blade composite joints[C]//Proceedings of the American Society for Composites 38th Technical Conference,2023. [106] Yao L,Wang J,He Y,et al.Hygrothermal effects on fatigue delamination behavior in composite laminates[J]. Composite Structures,2024,330:117830. [107] Wang Y,Zhupanska O I.Lightning strike thermal damage model for glass fiber reinforced polymer matrix composites and its application to wind turbine blades[J]. Composite Structures,2015,132:1182-1191. [108] Wang Y.Multiphysics analysis of lightning strike damage in laminated carbon/glass fiber reinforced polymer matrix composite materials:A review of problem formulation and computational modeling[J]. Composites Part A:Applied Science and Manufacturing,2017,101:543-553. [109] Laudani A A M,Vryonis O,Lewin P L,et al. Numerical simulation of lightning strike damage to wind turbine blades and validation against conducted current test data[J]. Composites Part A:Applied Science and Manufacturing,2022,152:106708. [110] He H X,Chen W J,Luo B,et al.On the electrical breakdown of GFRP wind turbine blades due to direct lightning strokes[J]. Renewable Energy,2022,186:974-985. [111] Zhao Y,Zhang Y,Zhou Q B,et al.Lightning damage on GFRP materials of wind turbines under positive first return stroke[J]. Electric Power Systems Research,2023,215:108978. [112] Wu P,Chen Z.Peridynamic electromechanical modeling of damaging and cracking in conductive composites:a stochastically homogenized approach[J]. Composite Structures,2023,305:116528. [113] Verma A S,Yan J Q,Hu W F,et al.A review of impact loads on composite wind turbine blades:impact threats and classification[J]. Renewable and Sustainable Energy Reviews,2023,178:113261. [114] Long S C,Chen C,Wang H R,et al.Distribution and propagation of matrix cracks within composite laminates under impact[J]. Composite Structures,2022,281:115005. [115] Verma A S,Vedvik N P,Haselbach P U,et al.Comparison of numerical modelling techniques for impact investigation on a wind turbine blade[J]. Composite Structures,2019,209:856-878. [116] Xu Y M,Zhu P Z,Wang W Z.Study of multiple impact behaviors of CFRP based on peridynamics[J]. Composite Structures,2023,322:117380. [117] Mishnaevsky L,Hasager C B,Bak C,et al.Leading edge erosion of wind turbine blades:Understanding,prevention and protection[J]. Renewable Energy,2021,169:953-969. [118] Pryor S C,Barthelmie R J,Campobasso S,et al.Atmospheric drivers of wind turbine blade leading edge erosion:Review and recommendations for future research[J]. Energies,2022,15(22):8553. [119] Hu W F,Chen W Y,Wang X B,et al.A computational framework for coating fatigue analysis of wind turbine blades due to rain erosion[J]. Renewable Energy,2021,170:236-250. [120] Walayat K,Haeri S,Iqbal I,et al.PD-DEM hybrid modeling of leading edge erosion in wind turbine blades under controlled impact scenarios[J]. Computational Particle Mechanics,2024,11(5):1903-1921. [121] Rubiella C,Hessabi C A,Soleiman F A.State of the art in fatigue modelling of composite wind turbine blades[J]. International Journal of Fatigue,2018,117:230-245. [122] Mendonça H G,Mikkelsen L P,Zhang B,et al.Fatigue delaminations in composites for wind turbine blades with artificial wrinkle defects[J]. International Journal of Fatigue,2023,175:107822. [123] Liu Z,Liang J L,He Z F,et al.A developed fatigue analysis approach for composite wind turbine blade adhesive joints using finite-element submodeling technique[J]. Engineering Failure Analysis,2024,164:108701. [124] Hu Y L,Madenci E.Peridynamics for fatigue life and residual strength prediction of composite laminates[J]. Composite Structures,2017,160:169-184. [125] Cao X,Qin X,Li H,et al.Non-ordinary state-based peridynamic fatigue modelling of composite laminates with arbitrary fibre orientation[J]. Theoretical and Applied Fracture Mechanics,2022,120:103393. [126] Madenci E,Barut A,Yaghoobi A,et al.Combined peridynamics and kinetic theory of fracture for fatigue failure of composites under constant and variable amplitude loading[J]. Theoretical and Applied Fracture Mechanics,2021,112:102824. [127] Liu B,Bao R,Sui F.A fatigue damage-cumulative model in peridynamics[J]. Chinese Journal of Aeronautics,2021,34(2):329-342. [128] Nguyen C T,Oterkus S,Oterkus E.Implementation of modified Wheeler model in peridynamic fatigue model to predict effects of overload and underload on fatigue crack growth rate[J]. Theoretical and Applied Fracture Mechanics,2021,116:103115. [129] Pacheco J,Pimenta F,Guimarães S,et al.Experimental evaluation of fatigue in wind turbine blades with wake effects[J]. Engineering Structures,2024,300:117140. |
| [1] | LIU Fupeng, DUAN Qinghao, ZHANG Jingrui, MA Jiandong, YU Jianxing. Research on Crack Propagation and Fatigue Reliability Analysis of Portholes of Cruise Ships [J]. Ship & Boat, 2024, 35(05): 1-11. |
| Viewed | ||||||
|
Full text |
|
|||||
|
Abstract |
|
|||||
