Ship & Boat ›› 2020, Vol. 31 ›› Issue (03): 73-77.DOI: 10.19423/j.cnki.31-1561/u.2020.03.073

Previous Articles     Next Articles

Design of Launch and Retrieval System for Deep-Sea Mining Vessel

LIU Zhi-tong1,2, HU Nan1,2, ZHOU Tian-ming1,2, PAN Zhi-jie1, WANG An-yi1,2   

  1. 1. CNPC Baoji Oilfield Machinery Co., Ltd., Baoji 721000, China;
    2. National Engineering Research Center for Oil and Gas Drilling Equipment, Baoji 721000, China
  • Received:2019-10-18 Revised:2019-11-20 Online:2020-06-25 Published:2021-08-20

深海采矿船布放回收系统设计

刘志桐1,2, 胡楠1,2, 周天明1,2, 潘志杰1, 王安义1,2   

  1. 1.宝鸡石油机械有限责任公司 宝鸡721000;
    2.国家油气钻井装备工程技术研究中心 宝鸡721000
  • 作者简介:刘志桐（1985-）,男,本科,工程师。研究方向：海洋油气装备研发。胡 楠（1982-）,男,硕士,高级工程师。研究方向：海洋油气装备研发。周天明（1978-）,男,硕士,高级工程师。研究方向：海洋油气装备研发。潘志杰（1989-）,男,本科,工程师。研究方向：海洋油气装备研发。王安义（1983-）,男,硕士,高级工程师。研究方向：海洋油气装备研发。

Abstract: The exploitation of the deep-sea mineral resources has become one of the important research topics in the world. This article studies the operation technology requirements for the launch and retrieval system on the deep-sea mining vessels. It carries out the analysis and demonstration of the key parameters of the main components, such as derrick, substructure, hoist and string handling system, based on the determination of the main technical parameters. It proposes the configuration scheme of the launch and retrieval system suitable for the operation of deep-sea mining vessels, and provides the preliminary general arrangement plan. It can provide references for the engineering design of the full-scale ships in China.

Key words: deep-sea mining, launch and retrieval system, selection and configuration, arrangement research

摘要： 文章针对深海采矿船布放回收系统作业工艺需求,在确定主要技术参数的基础上,对塔架、底座平台、提升绞车和管柱处理系统等主要部件的关键参数进行分析论证,提出适合深海采矿船作业需求的布放回收系统配置方案,并提供初步总体布置方案,为我国的实船工程化设计提供参考。

关键词: 深海采矿, 布放回收系统, 选型配置, 布局研究

CLC Number: