Ship & Boat ›› 2022, Vol. 33 ›› Issue (06): 63-72.DOI: 10.19423/j.cnki.31-1561/u.2022.06.063

Previous Articles     Next Articles

Structural Strength Analysis of Catamaran Crane Without Connecting Bridge

CHEN Yi1, YANG Huijie2, WU Jun3, YE Zengshen1, WU Jianguo1   

  1. 1. School of Civil Engineering, Zhejiang University of Technology, Hangzhou 310023, China;
    2. Hangzhou Port and Navigation Management Service Center, Hangzhou 310009, China;
    3. Hangzhou Jianghai Shipbuilding Technology Co., Ltd., Hangzhou 310005, China
  • Received:2022-01-12 Revised:2022-02-24 Online:2022-12-25 Published:2022-12-21

无连接桥的双体起重船结构强度分析

陈镒1, 杨辉杰2, 吴骏3, 叶增沈1, 吴剑国1   

  1. 1.浙江工业大学 土木工程学院 杭州 310023;
    2.杭州市港航管理服务中心 杭州 310009;
    3.杭州江海船舶技术有限公司 杭州 310005
  • 作者简介:陈 镒(1997-),男,硕士研究生。研究方向:结构工程研究。杨辉杰(1964-),男,硕士,教授级高级工程师。研究方向:船舶结构检验。吴 骏(1967-),男,本科,高级工程师。研究方向:船舶设计。叶增沈(1997-),男,硕士研究生。研究方向:结构工程研究。吴剑国(1963-),男,博士,教授。研究方向:船舶结构研究。

Abstract: A kind of catamaran crane with hoisting truss as connecting bridge structure has recently emerged on Qiantang River due to the prominent requirement of lifting and salvage in inland river and the difficulty of ship repair imposed by the situation of more ships than factories. The strength check of this new structure that is beyond the rules is a new problem in the ship inspection and certification. On the basis of relevant specifications, the analysis methods of the total longitudinal and local strength, total transverse and torsional strength, hoisting truss strength and supporting structure strength for this type of ship are presented and applied to the structural analysis of a 700 t crane ship. This method can be applied to the design and check of the same type of ship.

Key words: catamaran, crane ship, connection bridge, structural strength

摘要: 由于内河起重打捞业务需求和船多厂少修船难情况突出,钱塘江上新近出现了一种起重桁架兼作连接桥结构的双体起重船。对这种超规范的新型结构,其强度校核是船舶检验发证的新问题。论文在相关规范的基础上,提出了该船型的总纵及局部强度、总横及扭转强度,起重桁架强度以及支撑结构强度分析方法,并应用于1艘700 t排水量的起重船进行结构分析计算。该方法可用于同类型船舶的设计与校核。

关键词: 双体船, 起重船, 连接桥, 结构强度

CLC Number: