分段龙骨梁模型水弹性实验技术进展

doi:10.19423/j.cnki.31-1561/u.2024.04.002

船舶 ›› 2024, Vol. 35 ›› Issue (04): 11-20.DOI: 10.19423/j.cnki.31-1561/u.2024.04.002

分段龙骨梁模型水弹性实验技术进展

叶昱松¹, 姜季江², 张仕元^3,4, 付世晓^3,4, 武少波²

1.天津大学建筑工程学院天津 300350;
2.中远海运重工有限公司设计研究院上海 200135;
3.上海交通大学海洋工程全国重点实验室上海 200240;
4.高新船舶与深海开发装备协同创新中心上海 200240

收稿日期:2024-03-05 修回日期:2024-04-07 出版日期:2024-08-25 发布日期:2024-09-09
作者简介:叶昱松（2001-）,男,本科。研究方向：大型船舶水弹性问题数值与实验研究。姜季江（1976-）,男,硕士,高级工程师。研究方向：船舶设计与智能制造。张仕元（1994-）,男,博士研究生。研究方向：大型浮体水弹性响应及应力分析方法研究。付世晓（1976-）,男,博士,教授/博士生导师。研究方向：大型浮体、悬浮隧道等超大型浮体水弹性。武少波（1985-）,男,博士,工程师。研究方向：船舶结构设计分析。
基金资助:
国家自然科学基金基础科学中心项目（52088102）

Progress in Techniques of Hydroelastic Experiment for Segmented Keel Beam Models

YE Yusong¹, JIANG Jijiang², ZHANG Shiyuan^3,4, FU Shixiao^3,4, WU Shaobo²

1. School of Civil Engineering, Tianjin University, Tianjin 300350, China;
2. Design & Research Institute, COSCO Shipping Heavy Industry Co., Ltd., Shanghai 200135, China;
3. State Key Laboratory of Ocean Engineering, Shanghai Jiao Tong University, Shanghai 200240, China;
4. Collaborative Innovation Centre for Advanced Ship and Deep-Sea Exploration, Shanghai 200240, China

Received:2024-03-05 Revised:2024-04-07 Online:2024-08-25 Published:2024-09-09

摘要/Abstract

摘要： 水弹性实验是研究船舶水弹性响应的重要手段。该文总结了国内外船舶水弹性实验研究现状,对广泛使用的分段龙骨梁船模进行重点研究,包括结构设计、水动力模块设计、载荷形式和实验结果测量等方面内容,分析不同分段龙骨梁船模的适用性,总结了分段龙骨梁船模实验设计阶段的关键技术,并结合团队经验给出主要内容的设计指标,以期为船舶水弹性实验的设计提供参考。

关键词: 大型船舶, 水弹性实验, 分段船模, 实验设计

Abstract: Hydroelastic experiment is an important method to investigate the hydroelastic response of ships. The state-of-the-art of the hydroelastic experiment of ships at home and abroad has been summarized, with focuses on the widely used segmented keel beam model, including the structural design, hydrodynamic module design, loading types and experimental result measurement. The applicability of different segmented keel beam models is then analyzed. The key technologies of the segmented keel beam model in the experimental design stage are summarized to provide the design indicators for the main contents based on the team experience, in order to provide references for the design of the hydroelastic experiment for ships.

Key words: large ship, hydroelastic experiment, segmented model, experimental design

中图分类号:

P751

叶昱松, 姜季江, 张仕元, 付世晓, 武少波. 分段龙骨梁模型水弹性实验技术进展[J]. 船舶, 2024, 35(04): 11-20.

YE Yusong, JIANG Jijiang, ZHANG Shiyuan, FU Shixiao, WU Shaobo. Progress in Techniques of Hydroelastic Experiment for Segmented Keel Beam Models[J]. Ship & Boat, 2024, 35(04): 11-20.

参考文献

[1] FUKASAWA T, YAMAMOTO Y, FUJINO M, et al.Motion and longitudinal strength of a ship in head sea and the effects of non-linearities (4th report) experiments[J]. Journal of the Society of Naval Architects of Japan, 1981, 150:308-314.
[2] 林吉如, 郑苏龙, 孙勇. 整体弹性船模试验技术[J]. 中国造船, 1992(2):65-73.
[3] GRAMMATIKOPOULOS, APOSTOLOS, BANKS, et al. Experimental hydroelastic responses of an elastic containership-inspired barge model produced using additive manufacturing[C]//International Conference on Hydroelasticity in Marine Technology, 2018.
[4] IIJIMA K, SHIGEMI T, MIYAKE R, et al.A practical method for torsional strength assessment of container ship structures[J]. Marine Structures, 2004, 17(5):355-384.
[5] KORKUT E, ATLAR M, INCECIK A.An experimental study of global loads acting on an intact and damaged Ro-Ro ship model[J]. Ocean Engineering, 2005, 32:1370-1403.
[6] STORHAUG G, MALENICA S, CHOI B K, et al.Consequence of whipping and springing on fatigue and extreme loading for a 13000TEU container vessel based on model tests[C]//11th International Symposium on Pactical Design of Ships and Other Floating Structures, Rio de Janeiro, Brazil, 2010.
[7] CLASUSS G F,MARCO K,MATTHIAS D.Influence of the bow shape on loads in high and steep waves[C]// Proceedings of the 29th International Conference on Ocean,Offshore and Arctic Engineering,Shanghai,China,2010:159-170.
[8] 戴仰山,沈进威,宋竞正. 船舶波浪载荷[M]. 北京: 国防工业出版社,2007.
[9] 陈占阳,任慧龙,李辉,等. 超大型船舶变截面梁分段模型的载荷试验研究[J]. 哈尔滨工程大学学报,2012,33(3):263-268.
[10] TANG Y,SUN S L,YANG R S,et al.Nonlinear bending moments of an ultra large container ship in extreme waves based on a segmented model test[J]. Ocean Engineering,2022,243:110335.
[11] LI H,ZOU J,DENG B,et al.Experimental study of stern slamming and global response of a large cruise ship in regular waves[J]. Marine Structures,2022,86:103294.
[12] DESSI D,CIAPPI E.Slamming clustering on fast ships: from impact dynamics to global response analysis[J]. Ocean Engineering,2013,62:110-122.
[13] 丁军,汪雪良,胡嘉骏,等. 超大型VLCC波激振动和砰击振动模型试验研究[J]. 船舶力学,2015,19(1):144-151.
[14] CHEN Z Y,GUI H B,DONG P S,et al.Numerical and experimental analysis of hydroelastic responses of a high-speed trimaran in oblique irregular waves[J]. International Journal of Naval Architecture and Ocean Engineering,2018,11(1):409-421.
[15] PENG S,TEMAREL P,BENNETT S S,et al.Symmetric response of a hydroelastic scaled container ship model in regular and irregular waves[C]//Asme International Conference on Ocean. American Society of Mechanical Engineers,2014.
[16] KIM J H,KIM Y,KOROBKIN A.Comparison of fully coupled hydroelastic computation and segmented model test results for slamming and whipping loads[J]. International Journal of Naval Architecture and Ocean Engineering,2014,6(4):1064-1081.
[17] 焦甲龙,杨虎.一种水弹性试验船模U型龙骨梁的设计方法与工艺技术[C]//中国造船工程学会造船工艺学术委员会.2021年船舶先进制造工艺技术学术交流会论文集,华南理工大学土木与交通学院,上海船舶工艺研究所,2021:8.
[18] MARÓN A,KAPSENBERG G. Design of a ship model for hydro-elastic experiments in waves[J]. International Journal of Naval Architecture and Ocean Engineering,2014,6(4):1130-1147.
[19] 王一雯,吴卫国,刘正国,等. 基于弯扭组合的江海直达船舶波激振动模型试验研究[J]. 振动与冲击,2018,37(12):193-200.
[20] LIN Y,MA N,GU X,et al.Experimental study on the asymmetric impact loads and hydroelastic responses of a very large container ship[J]. International Journal of Naval Architecture and Ocean Engineering,2020,12:226-240.
[21] YANG P,FENG Q D,CHEN H S,et al.Combined backbone application on numerical simulations and a model experiment of a 20 000 TEU container ship[J]. Ocean Engineering,2023,223:108662.
[22] 张楷弘. 大外飘船舶非线性波浪载荷时域水弹性分析方法与应用研究[D]. 哈尔滨:哈尔滨工程大学,2018.
[23] HONG S Y,KIM W B.Experimental investigations of higher-order springing and whipping-WILS project[J]. International Journal of Naval Architecture and Ocean Engineering,2014,6(4):1160-1181.
[24] HERMUNDSTAD O A,MOAN T.Numerical and experimental analysis of bow flare slamming on a Ro-Ro vessel in regular oblique waves[J]. Journal of Marine Science & Technology,2005,10(3):105-122.
[25] FONSECA N,GUEDES SOARES C.Experimental investigation of the shipping of water on the bow of a containership[J]. Journal of Offshore Mechanics and Arctic Engineering,2005,127(4): 322-330.
[26] BENNETT S S,HUDSON D A,TEMAREL P.The influence of forward speed on ship motions in abnormal waves: experimental measurements and numerical predictions[J]. Journal of Fluids & Structures,2013,39:154-172.
[27] 林源,马宁,顾解忡,等. 分段船模试验中变截面船体梁的设计及应用[C]//中国造船工程学会船舶力学学术委员会测试技术学组2021年学术论文集. 上海交通大学海洋工程国家重点实验室,上海交通大学船舶海洋与建筑工程学院,上海交通大学海洋装备研究院,中国船舶科学研究中心,2021:10.
[28] ZHU S,WW M K,MOAN T.Experimental investigation of hull girder vibrations of a flexible backbone model in bending and torsion[J]. Applied Ocean Research,2011,33(4):252-274.
[29] DESSI D,MARIANI R,COPPOTELLI G.Experimental investigation of the bending vibrations of a fast vessel[J]. Australian Journal of Mechanical Engineering ,2007,4(2): 125-143.
[30] RAJENDRAN S,FONSECA N,GUEDES SOARES C.A numerical investigation of the flexible vertical response of an ultra large containership in high seas compared with experiments[J]. Ocean Engineering,2016,122:293-310.
[31] HONG S Y,KIM W B.Experimental investigations of higher-order springing and whipping-WILS project[J]. International Journal of Naval Architecture & Ocean Engineering,2014,6(4):1160-1181.
[32] JIAO J L,REN H L.Characteristics of bow-flare slamming and hydroelastic vibrations of a vessel in severe irregular waves investigated by segmented model experiments[J]. Journal of Vibroengineering,2016,18(4):2475-2494.
[33] JIAO J L,REN H L,SUN S Z,et al.Investigation of a ship’s hydroelasticity and seakeeping performance by means of large-scale segmented self-propelling model sea trials[J]. 浙江大学学报A辑(应用物理与工程)(英文版),2016,17(6):468-484.
[34] BENNETT S S,HUDSON D A,TEMAREL P.Global wave-induced loads in abnormal waves: comparison between experimental results and classification society rules[J]. Journal of Fluids & Structures,2014,49:498-515.
[35] SHABANI B,LAVROFF J,DAVIS M R,et al.Slam loads and pressures acting on high-speed wave-piercing catamarans in regular waves[J]. Marine Structures,2019,66:136-153.
[36] ADENYA C A,REN H,LI H,et al.Estimation of springing response for 550 000 DWT ore carrier[J]. Journal of Marine Science and Application,2016,15(3):260-268.
[37] STORHAUG G.The measured contribution of whipping and springing on the fatigue and extreme loading of container vessels[J]. International Journal of Naval Architecture and Ocean Engineering,2014,6(4):1096-1110.
[38] 赵南,胡嘉骏,李政杰,等. 波浪载荷模型试验开口测量梁设计[J]. 船海工程,2017,46(4):7-11.
[39] 汪雪良,顾学康,胡嘉骏,等. 双体船波浪载荷测试技术研究[J]. 舰船科学技术,2010,31(1):28-37.
[40] 焦甲龙,赵玉麟,张皓,等. 船舶波浪载荷与砰击载荷的大尺度模型水弹性试验研究[J]. 振动与冲击,2019,38(20):229-236.
[41] AKITA Y,OCHI K.Investigations on the strength of ships going in waves by model experiments[J]. Journal of Zosen Kiokai,1954(95): 153-159.
[42] DRUMMEN I,HOLTMANN M.Benchmark study of slamming and whipping[J]. Ocean Engineering,2014,86:3-10.

编辑推荐

Metrics

联系电话：（021）63161688-105006
传真：（021）63151255
E-mail：chuanbo@maric.com.cn

分段龙骨梁模型水弹性实验技术进展

Progress in Techniques of Hydroelastic Experiment for Segmented Keel Beam Models

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics

[1]	周陈炎, 孟巧, 吴颖高. 考虑波激振动的超大型船舶疲劳损伤计算[J]. 船舶, 2022, 33(03): 77-85.
[2]	胡胜谦;奚英奇;张雯;. 大型船舶路径指示与标识设计研究[J]. 船舶, 2018, 29(05): 105-110.