Ship & Boat ›› 2020, Vol. 31 ›› Issue (03): 118-126.DOI: 10.19423/j.cnki.31-1561/u.2020.03.118

Previous Articles    

Application of CATIA Logical to Physical Modeling in Detail Design of Marine Engine

GAO Lin-yang, WANG Chen, QIANG Yan   

  1. Shanghai Zhong Chuan NERC-SDT Co., Ltd., Shanghai 200011, China
  • Received:2019-10-29 Revised:2019-12-13 Online:2020-06-25 Published:2021-08-20

CATIA二维逻辑原理图驱动三维建模在轮机详细设计中的应用

高林洋, 王晨, 羌燕   

  1. 上海中船船舶设计技术国家工程研究中心有限公司 上海200011
  • 作者简介:高林洋（1988-）,男,本科,工程师。研究方向：船舶与海洋工程轮机专业三维设计与研究。王 晨（1988-）,男,本科,助理工程师。研究方向：船舶与海洋工程轮机专业三维设计与研究。羌 燕（1989-）,女,本科,工程师。研究方向：船舶与海洋工程轮机专业三维设计与研究。

Abstract: Based on the application of CATIA experience platform in the ship detail design, this article discusses and studies the CATIA Logical to Physical (L2P) modeling and the rapid modeling by using the piping specification. It analyzes the advantages and disadvantages of CATIA L2P modeling in comparison with the traditional modeling method. The application of CATIA 3D experience platform should be promoted in the detail design of the marine engine for the implementation of the design optimization.

Key words: marine engine detail design, CATIA 3D experience platform, Logical to Physical (L2P) modeling, rapid modeling of specification

摘要： 基于CATIA三维体验平台在船舶详细设计中的应用,文章论述和研究利用CATIA二维逻辑原理图驱动三维建模,以及采用管系规格书实现快速建模。通过与 传统建模方法对比分析了CATIA 软件二维逻辑原理图驱动三维建模的优缺点,努力推进CATIA 三维体验平台在船舶轮机详细设计中的运用,实现设计优化。

关键词: 轮机详细设计, CATIA, 三维体验平台, 二维逻辑原理图驱动三维建模, 规格书快速建模

CLC Number: