Ship & Boat ›› 2022, Vol. 33 ›› Issue (01): 93-97.DOI: 10.19423/j.cnki.31-1561/u.2022.01.093

Previous Articles     Next Articles

Analysis of Lubricating Oil and Feed Water During Ship Mooring

LIN Yangming, XU Guangchao, CHEN Xiangyu, LI Shiyong   

  1. DSIC Design & Research Institute Dalian Co., Ltd., Dalian 116021, China
  • Received:2021-03-25 Revised:2020-04-22 Published:2022-03-17

船舶系泊期间滑油及锅炉给水问题分析

林阳明, 徐广超, 陈翔宇, 李世用   

  1. 大连船舶重工集团设计研究院有限公司 大连 116021
  • 作者简介:林阳明(1977-),男,硕士,高级工程师。研究方向:船舶与海洋工程设计与开发。徐广超(1986-),男,本科,高级工程师。研究方向:船舶与海洋工程设计与开发。陈翔宇(1991-),男,本科,工程师。研究方向:船舶与海洋工程设计与开发。李世用(1986-),男,硕士,高级工程师。研究方向:船舶与海洋工程设计与开发。

Abstract: Lubricating oil and feed water are important items for the boiler inspection. However, the maintenance of the lubricating oil in the system is often neglected during when the ship is mooreding is often neglected in the ship during construction in shipyards, lacking while the concern of forthe water quality of the feed water quality is also lacking. It is therefore difficult to pass the inspection approval when facing the strict supervision of foreign ship owners. Based on the problems of the lubricating oil and feed water in the ship construction, the specific requirements of the relevant equipment manufacturers are studied to provide suggestions for the solutions of the relevant problems.

Key words: vessel, lubricating oil, hydraulic oil, feed water, salinity, main engine, cleanliness, pH value

摘要: 滑油和锅炉给水是锅炉报验中的重要项目。但是船厂在建造船舶时,往往忽视系泊期间对系统中滑油的维护,对锅炉给水的水质缺乏关注,因而面对国外船东严格的监造时,难以通过报验。该文以滑油、锅炉给水在船舶建造中出现的问题为例,研究了相关设备厂家的具体要求,并提出解决相关问题的建议。

关键词: 船舶, 滑油, 液压油, 锅炉给水, 盐度, 主机, 清洁度, pH值

CLC Number: