极地破冰船螺旋桨设计探讨

doi:10.19423/j.cnki.31-1561/u.2023.01.175

船舶 ›› 2023, Vol. 34 ›› Issue (01): 175-184.DOI: 10.19423/j.cnki.31-1561/u.2023.01.175

• 极地关键设备配套和核心能力建设 • 上一篇下一篇

极地破冰船螺旋桨设计探讨

丁举^1,2, 王建强^1,2, 刘正浩^1,2, 周旻¹, 孔为平¹

1.中国船舶及海洋工程设计研究院上海 200011;
2.喷水推进技术国防科技重点实验室上海 200011

收稿日期:2022-09-24 修回日期:2022-12-24 出版日期:2023-02-25 发布日期:2023-03-06
作者简介:丁举（1972-）,男,硕士,研究员。研究方向：船舶推进器设计研究。王建强（1990-）,男,硕士,工程师。研究方向：船舶推进器设计研究。刘正浩（1989-）,男,硕士,工程师。研究方向：船舶推进器设计研究。周旻（1986-）,女,本科,工程师。研究方向：船舶推进器设计研究。孔为平（1986-）,男,硕士,高级工程师。研究方向：船舶推进器设计研究。

Discussion on Propeller Design of Polar Icebreaker

DING Ju^1,2, WANG Jianqiang^1,2, LIU Zhenghao¹, ZHOU Min², KONG Weiping¹

1. Marine Design and Research Institute of China, Shanghai 200011, China;
2. Science and Technology on Waterjet Propulsion Laboratory, Shanghai 200011, China

Received:2022-09-24 Revised:2022-12-24 Online:2023-02-25 Published:2023-03-06

摘要/Abstract

摘要： 螺旋桨是船舶的核心部件,破冰船螺旋桨性能的优劣直接关系到全船的快速性能、破冰性能、振动噪声性能和安全航行性能,故冰级螺旋桨设计是破冰船设计过程中的关键环节,需要确保螺旋桨性能满足设计指标要求。冰级螺旋桨运行于冰水环境,螺旋桨设计时需要考虑冰块对螺旋桨的影响,而国内在冰级螺旋桨设计方面缺少经验。该文在对冰级螺旋桨特点分析基础上,建立了冰级螺旋桨设计流程（IPDP）,以一型PC2级重型破冰船螺旋桨设计为例,给出了设计结果和模型试验的验证结果。研究表明：冰级螺旋桨负荷重、工况多,其设计流程不同于常规螺旋桨,需要特别关注螺旋桨主参数与船型参数的迭代设计,既要验证敞水域航行的快速性能和振动性能,又要验证冰区航行的快速性能和螺旋桨强度性能等;对高冰级螺旋桨,需要设计成桨叶可拆式定距桨型式,方便单片桨叶的维修更换。

关键词: 破冰船, 冰级螺旋桨, 强度, 设计, 模型试验

Abstract: Propeller is the core component of a ship. The performance of the propeller of an icebreaker is directly related to the speed/power performance, ice-breaking performance, vibration and noise performance and safe navigation performance of the whole ship. The design of the ice class propeller is therefore the key stage during the design of the icebreaker. It is necessary to ensure that the performance of the propeller can meet the design requirements. Different from the conventional propeller that operates in the open waters, the ice class propeller operates in the ice waters. The impact of the ice on the propeller should be considered during the design of the ice class propeller. However, there is little experience of the ice class propeller design in China. The ice class propeller design process (IPDP) has been established based on the analysis of the characteristics of the ice class propeller in the current study. The design results and model test results of the ice class propeller of a PC2 heavy icebreaker are presented. The results show that the design process of the ice class propeller is different from that of the conventional propeller with special focuses on the iterative design of the propeller parameters and hull parameters, due to the heavy load and multi-working conditions of the ice class propeller. It is necessary to verify not only the speed/power performance and vibration performance in the open waters, but also the speed/power performance and propeller strength performance in the ice regions. A detachable fixed pitch propeller is designed for the high ice class propeller to facilitate the repair and replacement of one single blade.

Key words: icebreaker, ice class propeller, strength, design, model test

中图分类号:

丁举, 王建强, 刘正浩, 周旻, 孔为平. 极地破冰船螺旋桨设计探讨[J]. 船舶, 2023, 34(01): 175-184.

DING Ju, WANG Jianqiang, LIU Zhenghao, ZHOU Min, KONG Weiping. Discussion on Propeller Design of Polar Icebreaker[J]. Ship & Boat, 2023, 34(01): 175-184.

参考文献

[1] 张福民, 徐宁, 冯志根, 等. “雪龙”号极地破冰科学考察船整体设计改造工程项目技术特点介绍[J]. 船舶,2017 (增1):50-54.
[2] PUSTOSHNY А V, DARCHIEV G K, FROLOVA I G.The problem of propeller design for high ice class transportation ships[C]// Proceeding of 5th international symposium on marine propulsors (SMP’17). Espoo, Finland, 2017.
[3] SEARLE S,VEITCH B,BOSE N.Ice class propeller performance in extreme Conditions[C]∥Society of Naval Architects and Marine Engineers. 1999: 127-152.
[4] STEPHEN J J.Resistance and propulsion model tests of the USCGC Healy (Model 546) in ice[R]. National Research Council Canada, 2005.
[5] 孙文林, 王超, 康瑞, 等. 冰区航行船舶推进系统设计的若干考虑[J]. 船舶工程, 2015(9):31-36.
[6] 朱成华, 齐江辉, 郭健, 等.核动力破冰船总体技术特征对比分析[J] . 中国造船, 2021(1):234-244.
[7] 朱成华, 齐江辉, 郭健, 等. 不同螺旋桨配置对重型破冰船推力的影响分析[J].哈尔滨工程大学学报, 2022(1):69-75.
[8] AMIN M A, VEITCH B.Application of polar class rules for fatigue to an existing arctic class icebreaker propeller[C]// Fifth International Symposium on Marine Propulsors (SMP’17). Espoo, Finland, 2017.
[9] 王建强, 丁举.冰载荷下螺旋桨强度校核计算[C]//2015年船舶水动力学学术会议论文集. 2015:10-17.
[10] SAMPSON R,ATLA R M, SASAKI N.Propeller ice interaction-
effect of proximity[C]//First International Symposium on Marine Propellers( SMP’09 ). Trondheim, 2009.
[11] 武珅, 刘亚非, 曾志波,等. 空泡效应对冰阻塞环境下的螺旋桨性能影响研究[J]. 中国造船 , 2018 (1):110-121.
[12] WAN C R, LIU Z H, DING J.Model tests and numerical predictions for cavitation of ice-classed propeller[C]// The 3rd International Symposium of Cavitation and Multiphase Flow. Shanghai, China, 2019.
[13] 薛庆雨, 武珅, 顾湘男, 等. 冰阻塞诱导的连体涡空泡及其发生机理分析[J]. 中国舰船研究, 2020(5): 90-95.
[14] 伍锐, 丁举, 刘恒, 等.某极地破冰船螺旋桨带PHV空泡诱导脉动压力特性分析[C]//中国造船工程学会船舶力学学术委员会测试技术学组2021年学术会议论文集. 2021:400-410.
[15] 徐佩, 王超, 郭春雨, 等. 冰阻塞条件下螺旋桨诱导激振力试验研究[C]//中国造船工程学会船舶力学学术委员会测试技术学组2021年学术会议论文集. 2021:101-116.
[16] RMRS. Rules for the classification and construction of sea-going ships: Part VII—Machinery installations[S]. 2021.
[17] 中国船级社.《材料与焊接规范》第1篇金属材料[S]. 2018.
[18] IACS. URI3 machinery requirements for polar class ships[S]. 2006.
[19] 中国船级社.《钢质海船入级规范2021版》第8篇
轮机—第13章极地级船舶的补充规定[S]. 2021.
[20] DNVGL. Rules for classification: Ships—Part 6 Additional class notations—Chapter 6 Cold climate[S]. 2019.
[21] DNVGL.Rules for classification: Ships—Part 5 Ship types—Chapter 10 Vessels for special operations[S]. 2019.
[22] DNVGL.Rules for classification: Ships—Part 5 Ship types—Chapter 10 Vessels for special operations[S]. 2021.
[23] DNVGL. CLASS GUIDELINE-DNV-CG-0041- Ice strengthening of propulsion machinery and hull appendages[S]. 2021.
[24] PASHIN V M, APPOLONOV E M,BELYASHOV V A,et al.Scientific promotion of 60 MW general-purposenuclear icebreaker designing[J].Ships and Offshore Structures, 2011(6):185-193.

编辑推荐

Metrics

联系电话：（021）63161688-105006
传真：（021）63151255
E-mail：chuanbo@maric.com.cn

极地破冰船螺旋桨设计探讨

Discussion on Propeller Design of Polar Icebreaker

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	岳前进, 王国军, 董睿, 黄亚婷, 吴宽宽, 张大勇. 我国海冰工程研究回顾[J]. 船舶, 2023, 34(01): 51-60.
[2]	黄嵘. 中国极地科考破冰船航行实践和未来极地船型发展建议[J]. 船舶, 2023, 34(01): 72-79.
[3]	蔡乾亚, 王曙光, 赵振华, 丁筠. 极地破冰科考船建造关键技术[J]. 船舶, 2023, 34(01): 98-109.
[4]	王燕舞, 杨薛航, 曾佳, 徐义刚, 张伟. 极地重型破冰船结构设计特点浅析[J]. 船舶, 2023, 34(01): 119-128.
[5]	陆玮, 智力. 重型破冰船电网架构研究[J]. 船舶, 2023, 34(01): 129-136.
[6]	龙飞, 方斌, 杨超. 极地破冰船吊舱推进系统现状及发展[J]. 船舶, 2023, 34(01): 154-160.
[7]	殷汉军, 刘城, 王其峰. 极地船轴系的强度设计分析[J]. 船舶, 2023, 34(01): 161-174.
[8]	周国平. 深远海大型多功能综合救助船工程开发研究[J]. 船舶, 2022, 33(06): 1-9.
[9]	李志雨, 童波, 邵武豪. 采用循环水技术的大型养殖工船总体设计探讨[J]. 船舶, 2022, 33(06): 20-29.
[10]	胡方珍. 船舶进出三峡升船机时下沉量模型试验研究[J]. 船舶, 2022, 33(06): 30-36.
[11]	陈镒, 杨辉杰, 吴骏, 叶增沈, 吴剑国. 无连接桥的双体起重船结构强度分析[J]. 船舶, 2022, 33(06): 63-72.
[12]	王鹏印, 沈会宇, 王海波, 王运才, 安乐. 30.7万t VLCC配备轴带发电机轴系综合优化设计[J]. 船舶, 2022, 33(06): 96-106.
[13]	杜睿, 孟宁. 一型锂电池客渡船电池安全设计分析[J]. 船舶, 2022, 33(05): 82-87.
[14]	刘渊, 夏骏, 傅晓红, 周祎隆. 船舶人因照明系统设计[J]. 船舶, 2022, 33(05): 99-106.
[15]	徐谦, 张文斌, 蒋永旭, 崔宝明, 钱新春. 基于FMECA法风险评估的双壁管通风系统优化设计[J]. 船舶, 2022, 33(05): 107-112.