船舶 ›› 2019, Vol. 30 ›› Issue (03): 21-25.DOI: 10.19423/j.cnki.31-1561/u.2019.03.021
• 研究与设计 • 上一篇 下一篇
张彩华
收稿日期:
修回日期:
出版日期:
发布日期:
作者简介:
ZHANG Cai-hua
Received:
Revised:
Online:
Published:
摘要： 大型全回转起重船起重机吊重货旋转时将产生很大的横倾力矩,需配置抗横倾水舱,通过反向调拨压载水,使船舶横倾控制在安全范围之内。文章对合理布置抗横倾水舱、确定抗横倾水舱的舱容、抗横倾泵流量的选取和抗横倾系统的模式进行论述,对于大型全回转和半回转起重船的分析设计提供较好的参考和借鉴。
关键词: 大型起重船, 抗横倾, 模式
Abstract: A large heeling moment will be produced when the heavy slewing crane vessel lifts the heavy cargo to revolve. The heel of the vessel should be controlled within a safe range by reversing the ballast water through the arrangement of the ant-heeling water tanks. It discusses the reasonable arrangement of the anti-heeling water tanks, the determination of the capacity of the anti-heeling water tanks, the selection of the anti-heeling pumping flow and the mode of the anti-heeling system, which can provide references for the analysis and design of the large heavy slewing crane vessel and the semi-slewing crane vessel.
Key words: heavy crane vessel, anti-heeling, mode
中图分类号:
U674.35
张彩华. 大型全回转起重船抗横倾系统设计[J]. 船舶, 2019, 30(03): 21-25.
ZHANG Cai-hua. On Design of Anti-heeling System for Heavy Slewing Crane Vessel[J]. Ship & Boat, 2019, 30(03): 21-25.
0 / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://chuanbo.magtechjournal.com/CN/10.19423/j.cnki.31-1561/u.2019.03.021
http://chuanbo.magtechjournal.com/CN/Y2019/V30/I03/21
