喷水推进技术发展综述

doi:10.19423/j.cnki.31-1561/u.2023.06.001

船舶 ›› 2023, Vol. 34 ›› Issue (06): 1-13.DOI: 10.19423/j.cnki.31-1561/u.2023.06.001

• • 下一篇

喷水推进技术发展综述

刘建国, 张志远, 戴原星, 孙翀

中国船舶及海洋工程设计研究院上海 200011

收稿日期:2023-10-19 修回日期:2023-11-27 出版日期:2023-12-25 发布日期:2023-12-28
作者简介:刘建国（1970-）,男,本科,研究员。研究方向：喷水推进技术研究。张志远（1989-）,男,硕士,高级工程师。研究方向：喷水推进技术研究。戴原星（1988-）,男,博士,高级工程师。研究方向：喷水推进技术研究。孙翀（1995-）,男,博士,工程师。研究方向：喷水推进技术研究。
基金资助:
喷水推进技术重点实验室基金项目（K90016）

State of the Art Review of Waterjet Propulsion Technology

LIU Jianguo, ZHANG Zhiyuan, DAI Yuanxing, SUN Chong

Marine Design & Research Institute of China, Shanghai 200011, China

Received:2023-10-19 Revised:2023-11-27 Online:2023-12-25 Published:2023-12-28

摘要/Abstract

摘要： 该文针对喷水推进系统的控制体、推力表征、喷水推进与相互影响等基础理论研究,喷水推进泵、进口流道、操舵倒航机构、低噪声推进器等喷水推进系统的核心设计方法、相关仿真评估与试验验证手段,以及喷水推进装置在高速军、民船舶与两栖车辆三大领域的典型应用现状,进行了系统性论述。根据喷水推进技术特点以及其与现代技术发展的融合,提出了喷水推进与船体一体化系统设计、水动力设计从宏观走向微观、喷水推进数字化与智能化技术、集成电力驱动的喷水推进系统、面向隐身需求的喷水推进协调设计等喷水推进技术发展趋势。

关键词: 喷水推进, 推进泵, 操舵倒航机构, 进口流道, 设计理论, 仿真验证, 高速

Abstract: This paper systematically discusses the basic theoretical research on the control volume, thrust characterization, waterjet propulsion and their interaction of the waterjet propulsion system, and the key design methods, relevant simulation evaluation and test verification methods of the waterjet propulsion system of the waterjet propulsion pump, inlet duct, steering and reversing mechanism and low-noise propulsion system. It also discusses the current status of the typical applications of waterjet propulsion devices in the three major fields of high-speed military vessels, civilian ships and amphibious vehicles. According to the characteristics of waterjet propulsion technology and its integration with the development of modern technology, the development trends of the waterjet propulsion technology are proposed, including the integrated system design of the waterjet propulsion and the ship, the hydrodynamic design from macro to micro, the digital and intelligent technology of the waterjet propulsion, the integrated electric-driven waterjet propulsion system, and the coordination design of the waterjet propulsion for stealthiness.

Key words: waterjet propulsion, propulsion pump, steering and reversing mechanism, inlet duct, design theory, simulation verification, high speed

中图分类号:

U664.34

刘建国, 张志远, 戴原星, 孙翀. 喷水推进技术发展综述[J]. 船舶, 2023, 34(06): 1-13.

LIU Jianguo, ZHANG Zhiyuan, DAI Yuanxing, SUN Chong. State of the Art Review of Waterjet Propulsion Technology[J]. Ship & Boat, 2023, 34(06): 1-13.

参考文献

[1] ITTC. Report of the High-speed Marine Vehicle Committee[C]// Proceedings of the 18th International Towing Tank Conference. Kobe, Japan: ITTC, 1987: 275-344.
[2] ALLISON J.Marine waterjet propulsion[J]. SNAME Transactions, 1993, 101: 275-335.
[3] ALEXANDER K V, COOP H G, VAN TERWISGA T J. Waterjet-hull interaction: recent experimental results[J]. Transactions of SNAME, 1994, 102: 87-105.
[4] COOP H G.Investigation of hull-waterjet interaction effects[D]. Christchurch: University of Canterbury, 1995.
[5] VAN TERWISGA T J. Waterjet-hull Interaction [D]. Delft: Delft University of Technology, 1996.
[6] Waterjets Group.Final report of and recommendations to the 21st ITTC[C]//Proceedings of the 21st International Towing Tank Conference. Trondheim, Norway: ITTC, 1996: 189-209.
[7] WISLICENUS G F.Flud mechanics of turbomachinery[M]. New York: McGraw-Hill Book Co., 1947: 1-28.
[8] BRUCE E P, GEARHART, W S, ROSS, J R, et al.The design of pumpjets for hydrodynamic propulsion[C]//
Proceedings of the International Symposium on Fluid Mechanics and Design of Turbomachinery, 1970.
[9] McBRIDE M W. Refinement of the mean streamline method of blade section design[J]. ASME Journal of Fluid Engineering, 1977, 99:561-566.
[10] 金平仲,曾松祥,沈奉海,等. 轴流泵的变环量设计方法[J]. 水泵技术,1985(2):14-20.
[11] LEWIS R I.Turbomachinery performance analysis[M]. Amsterdam: Elsevier, 1996.
[12] ZANGENEH M.A compressible three‐dimensional design method for radial and mixed flow turbomachinery blades[J]. International Journal for Numerical Methods in Fluids, 1991(5): 599-624.
[13] ZANGENEH M.Inviscid-viscous interaction method for three-dimensional inverse design of centrifugal impellers[J]. Journal of turbomachinery, 1994(2): 280-290.
[14] GOTO A, TAKEMURA T, ZANGENEH M.Suppression of secondary flows in a mixed-flow pump impeller by application of three-dimensional inverse design method: part 2—experimental validation[J]. Journal of turbomachinery, 1996(3): 544-551.
[15] BONAIUTI D, ZANGENEH M, AARTOJARVI R, et al.Parametric design of a waterjet pump by means of inverse design, CFD calculations and experimental analyses[J]. Journal of Fluids Engineering, 2010(3): 031104.
[16] 蔡佑林, 王立祥, 张新. 混流泵叶轮三元可控速度矩的设计[J]. 流体机械, 2005(11): 13-15, 46.
[17] TAYLOR T E, KERWIN J E.Waterjet pump design and analysis using a coupled lifting surface and RANS procedure[C]// Proceedings of International Conference on Waterjet Propulsion II. Amsterdam: RINA, 1998: 1-9.
[18] 常书平, 王永生, 丁江明, 等. 混流式喷水推进泵水力设计和性能预报[J]. 哈尔滨工程大学学报, 2011(6):708-713.
[19] 常书平, 王永生, 靳栓宝. 轴流式喷水推进泵水力设计和性能检验[J]. 哈尔滨工程大学学报, 2011(10):1278-1282.
[20] 靳栓宝, 王永生, 丁江明, 等. 混流式喷水推进泵三元设计及数值试验[J]. 哈尔滨工程大学学报, 2012(10):1223-1227.
[21] 龙云. 喷水推进泵水力优化设计方法及空化研究[D]. 上海:上海交通大学, 2018.
[22] 郝宗睿, 李超, 任万龙, 等. 基于改进粒子群算法的喷水推进泵叶片优化设计[J]. 排灌机械工程学报, 2020(6):566-570.
[23] PARK W G, YUN H S, CHUN H H, et al.Numerical analysis of intake flow of waterjet pump[C]// Proceedings of the 2nd PNU International Colloquium on Waterjet, Busan, Korea, 2002: 73-91.
[24] CHOI G I, AHN Y W.2002, The generation of waterjet inlet geometry using NURBS[C]// Proceedings of the 2nd PNU International Colloquium on Waterjet. Busan, Korea, 2002: 105-110.
[25] BULTEN N W H, VERBEEK R. Design of optimal inlet duct geometry based on vessel operational profile
[C]// Proceedings of the International Conference on Fast Sea Transportation, Ischia, Italy, 2003: 35-40.
[26] WILSON M B, CHESNAKAS C, GOWING S, et al.Analysis of hull boundary layer velocity distributions with and without active waterjet inlets[C]// Proceedings of International Conference on Waterjet Propulsion 4, London, UK, 2004: 29-37.
[27] 汲国瑞, 蔡佑林, 李宁, 等. 喷水推进进口流道唇口参数对出口不均匀度和驻点位置影响分析[J]. 中国造船, 2016(4): 109-115.
[28] CHISLETT M S, ECLECTICS M, MΦLGAARD A. Waterjet steering and stopping forces[C]//The International Conference on Waterjet Propulsion Latest Developments, Amsterdam, Sweden, 1998.
[29] AARTOJÄRVI R, HEDER M, LUNDBERG J.et al. Implementation of results of CFD analysis to the design of a new waterjet steering and reversing unit[C]//Proceedings of International Conference on Waterjet Propulsion 4, London, UK, 2004: 1-9.
[30] 田乃东. 高速两栖车辆用喷水推进操舵倒航机构的研究[D].上海:上海交通大学, 2009.
[31] 王俊,李贵斌,张岩,等.喷水推进一体式操舵倒航机构中方向舵受力的CFD研究[J].水动力学研究与进展(A辑), 2022(1):21-27.
[32] 方丹群, 张斌, 孙家麟,等. 噪声控制工程学[M]. 北京: 科学出版社, 2013.
[33] 盛美萍, 王敏庆, 孙进才. 噪声与振动控制技术基础[M]. 北京: 科学出版社, 2007.
[34] 汤方平. 喷水推进轴流泵设计及紊流数值分析[D]. 上海:上海交通大学, 2007.
[35] HU P, ZANGENEH M.CFD calculation of the flow through a waterjet pump[C]//International Conference on Waterjet Propulsion III, Gothenborg, 2001.
[36] 王福军. CFD 在水力机械湍流分析与性能预测中的应用[J]. 中国农业大学学报, 2005(4):75-80.
[37] 王福军, 黎耀军, 王文娥,等. 水泵CFD应用中的若干问题与思考[J]. 排灌机械, 2005(5):1-10.
[38] LI W, AGARWAL R K, JI L L, et al.Numerical simulation of incipient rotating stall characteristics in a mixed flow pump[C]//Proceedings of the AIAA SciTech 2019 Forum, San Diego, California. Virginia: AIAA, 2019.
[39] 刘承江, 丁江明, 苏永生,等. 喷水推进泵空化性能数值模拟与试验验证[J]. 船舶力学, 2018(1):38-44.
[40] 邱继涛, 李宁, 王宗龙. 喷水推进轴流泵汽蚀性能RANS模拟与不确定度分析[J]. 船舶工程, 2021(10):82-85.
[41] 郭嫱, 王宇, 黄先北,等. 喷水推进泵叶轮空化涡流的数值模拟研究[J]. 船舶力学, 2022(1):30-37.
[42] HUANG R F,JI B,LUO X W,et al.Numerical investigation of cavitation-vortex interaction in a mixed-flow waterjet pump[J].Journal of Mechanical Science and Technology, 2015(9):3707-3716.
[43] 龙云, 冯超, 王路逸, 等.喷水推进泵临界空化工况空化流态试验[J]. 北京航空航天大学学报, 2019(8):1512-1518.
[44] 李伟,杨震宇,施卫东,等.喷水推进泵非均匀进流研究进展[J].排灌机械工程学报,2022(8):757-765.
[45] 邱继涛, 尹晓辉, 王仁智. 喷水推进器进口流道水动力性能分析[J]. 中国舰船研究, 2022(1):11-17.
[46] 汲国瑞,蔡佑林,李宁,等.喷水推进进口流道倾斜角对其效率影响分析[J].舰船科学技术, 2016(5):55-58, 96.
[47] 史俊, 冯学东, 李光琛,等. 进口长度对船舶喷水推进器进水流道性能的影响[J]. 船海工程, 2016(6): 81-84, 88.
[48] 罗灿, 成立, 刘超. 格栅安装角对喷水推进泵装置性能影响的数值模拟[J]. 扬州大学学报(自然科学版), 2015(2):65-69.
[49] 王永生, 王绍增, 靳栓宝,等. 装有格栅的进水流道进水口流通能力的研究[J]. 华中科技大学学报(自然科学版), 2012(10):72-77.
[50] HUANG C L,DAI R,WANG Z L.Effects of upstream vortex generators on the intake duct performance for a waterjet propulsion system[J].Ocean Engineering,2021, 239: 109838.
[51] HUANG R F,DAI Y X,LUO X W,et al.Multi-objective optimization of the flush-type intake duct for a waterjet propulsion system[J].Ocean Engineering,2019,187:106172.
[52] 李贵斌, 王俊, 王立祥. 喷水推进操舵倒航机构受力研究[J]. 水动力学研究与进展(A辑), 2020(1): 84-89.
[53] ZHAI Z, LIU X, WANG J, et al.Numerical simulations of the steering device in waterjet propulsion and analyses of steering forces[C]//Proceedings of the 13th International Conference on Hydrodynamics, Songdo, Korea, 2018.
[54] 王俊, 李贵斌, 张岩,等. 喷水推进一体式操舵倒航机构中方向舵受力的CFD 研究[J]. 水动力学研究与进展(A 辑), 2022(1): 21-27.
[55] BULTEN N, VERBEEK R.CFD simulation of the flow through a waterjet installation[C]//Proceedings of International Conference on Waterjet Propulsion 4-Latest Developments, London, UK, 2004.
[56] 郭军, 陈作钢, 戴原星, 等. 喷水推进器进流面获取方法及其应用[J]. 上海交通大学学报, 2020(1): 1-9.
[57] 常书平, 姚丁元, 李昆鹏,等. 基于推力数值计算的喷水推进船快速性预报与验证[J]. 船舶工程, 2021(2): 63-66, 157.
[58] DELANEY K, DONNELLY M, EBERT M, et al.Use of RANS for waterjet analysis of a high-speed sealift concept vessel[C]//First International Symposium on Marine Propulsors, Trondheim, Nowary, 2009.
[59] ESLAMDOOST A.The Hydrodynamics of Waterjet/Hull Interaction[D]. Gothenburg: Chalmers University of Technology, 2014.
[60] HINO T, OHASHI K.Numerical simulation of flow around a waterjet propelled ship[C]//First International Symposium on Marine Propulsors, Trondheim, Nowary, 2009.
[61] 戴原星,张志远,刘建国,等.喷水推进三体船阻力与自航数值模拟研究[J].船舶, 2019(1):105-111.
[62] 戴原星, 王金宝, 尹晓辉,等. 某V型船尾四台喷水推进器进流特性数值模拟与分析[J]. 中国造船, 2018(2): 72-79.
[63] 张恒, 王仁智, 蔡佑林,等. 喷射流浸没深度对喷水推进尾迹场的影响分析[J]. 船舶, 2022(3): 20-27.
[64] 付建,丁江明,李嘉.浸没式喷水推进器水动力噪声的数值预报[J].大连海事大学学报,2023(1):85-92.
[65] BULTEN N.A breakthrough in waterjet propulsion systems[C]//Proceedings of Doha International Maritime Defence Exhibition and Conference, 2008: 1-6.
[66] PERI D, KANDASAMY M, TAHARA Y, et al.Simulation based design with variable physics modeling and experimental verification of a water-jet propelled catamaran[C]//29th Symposium on Naval Hydrodynamics, Gothenburg, Sweden, 2012.
[67] GUO J, ZHANG Y, CHENG Z G, et al.CFD-based multi-objective optimization of a waterjet-propelled trimaran[J]. Ocean Engineering, 2020, 195: 106755.
[68] LIGHTHILL M J.On sound generated aerodynamically I. General theory[J]. Proceedings of the Royal Society of London, Series A: Mathematical and Physical Sciences, 1952, 211: 564-587.
[69] CURLE N.The influence of solid boundaries upon aerodynamic sound[J]. Proceedings of the Royal Society of London, Series A: Mathematical and Physical Sciences, 1955, 231: 505-514.
[70] FFOWCS WILLIAMS J E, HAWKINGS D L. Sound generation by turbulence and surfaces in arbitrary motion[J]. Philosophical Transactions of the Royal Society of London, Series A: Mathematical and Physical Sciences, 1969, 264: 321-342.
[71] SUN Y, LIU W, LI T Y.Numerical investigation on noise reduction mechanism of serrated trailing edge installed on a pump-jet duct[J]. Ocean Engineering, 2019, 191: 106489.
[72] 付建,王永生,靳栓宝,等.LES和DES在流体动力噪声预报中的适用性分析[J].华中科技大学学报(自然科学版), 2015(2):66-70.
[73] 付建, 王永生, 靳栓宝. 混流泵水动力噪声的数值预报方法[J].中南大学学报(自然科学版), 2016(1):62-68.
[74] 刘强, 王永生, 张明宇,等. 喷水推进器水下辐射噪声边界元计算方法[J]. 中国舰船研究, 2017 (4): 83-88.
[75] 刘敏, 张宁, 李新汶,等. 泵喷推进器导管对噪声传播特性的影响[J]. 舰船科学技术, 2011(8): 20-23.
[76] ITTC. Waterjet system performance[C]// ITTC Quality System Manual Recommended Procedures and Guidelines, Wuxi, China, 2017: 3-10.
[77] 关醒凡. 现代泵理论与设计[M]. 北京:中国宇航出版社,2011.
[78] 关醒凡, 袁寿其, 张建华, 等. 轴流泵系列水力模型试验研究报告[J]. 水泵技术, 2004(3): 3-7, 21.
[79] 郑建华. 混流泵水力模型的试验研究[J]. 水泵技术, 1993(3): 8-10.
[80] TAN D,LI Y C,WILKES I,et al.Experimental investigation of the role of large scale cavitating vortical structures in performance breakdown of an axial waterjet pump[J].Journal of Fluids Engineering, 2015(11):111301.
[81] VAN TERWISGA.Report of the specialist committee on validation of waterjet test procedures to the 24th ITTC[C]//The 24th International Symposium on Marine Propulsors Launceston, Australia, 2013: 87-96.
[82] VAN TERWISGA.Report of the specialist committee on validation of waterjet test procedures to the 23rd ITTC[C]//The 23rd International Towing Tank Conference, Venice, Italy, ITTC. II: 387-415.
[83] 王立祥, 蔡佑林. 喷水推进及推进泵设计理论和技术[M]. 上海: 上海交通大学出版社, 2018.
[84] 周加建,刘建国.喷水推进装置推力直接测量台架的研究开发[J].船舶力学,2018(7):783-788.
[85] 蔡佑林, 汲国瑞, 冯超, 等. 喷水推进推力测试方法[J]. 中国造船, 2022(4): 107-114.
[86] COZIGN H, HALLMANN R, KOOP A H.Analysis of the velocities in the wake of an azimuthing thruster, using PIV measurements and CFD calculations[C]//Dynamic Positioning Conference, Houston, Texas, USA, 2010.
[87] UZOL O,CHOW Y C,KATZ J,et al.Unobstructed particle image velocimetry measurements within an axial turbo-pump using liquid and blades with matched refractive indices[J].Experiments in Fluids,2002(6):909-919.
[88] WERNET M.The NASA subsonic jet particle image velocimetry(PIV) dataset[R]. 2011.
[89] COPENHAVER W, ESTEVADEORDAL J, GOGINENI S, et al.DPIV study of near-stall wake-rotor interactions in a transonic compressor[J]. Experiments in Fluids, 2002(6):899-908.
[90] 杨孟子, 冯超, 刘腾岩,等. 混流泵进出口流道内压力脉动与噪声特性试验[J]. 水泵技术, 2022(6):37-40, 45.
[91] 冯超. 喷水推进混流泵空化诱导压力脉动与振动特性试验研究[R]. 上海:中国船舶及海洋工程设计研究院, 2021.
[92] 刘腾岩, 冯超, 杨孟子, 等. 混流泵水力模型导叶叶片数对外特性和噪声影响试验研究[C]//第十三届全国实验流体力学学术会议, 合肥, 2023.
[93] 郭正祥. 俄罗斯未来新型两栖战车构想[J]. 坦克装甲车辆, 2018(17):17-22.

编辑推荐

Metrics

联系电话：（021）63161688-105006
传真：（021）63151255
E-mail：chuanbo@maric.com.cn

喷水推进技术发展综述

State of the Art Review of Waterjet Propulsion Technology

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

[1]	张锐志, 陈建平, 刘群, 夏丁良, 张岩, 翟志红, 杨孟子, 郭娅. 《船舶与海洋技术喷水推进水力性能试验》国际标准研究[J]. 船舶, 2023, 34(06): 28-34.
[2]	董小倩, 杨晨俊. 空泡对喷水推进器流道脉动压力影响的试验研究[J]. 船舶, 2023, 34(06): 35-42.
[3]	戴韧, 王忠杰, 陈榴, 樊丰凯, 王宗龙. 基于VG/VGJ的喷水推进进口流道流动控制方法[J]. 船舶, 2023, 34(06): 43-49.
[4]	李宁. 基于声学有限元的喷水推进器流道声传播特性研究[J]. 船舶, 2023, 34(06): 50-55.
[5]	龙云, 田晨彪, 李娅杰, 钟锦情. 喷水推进泵驼峰区波峰与波谷内流作用机制[J]. 船舶, 2023, 34(06): 56-64.
[6]	王俊, 范佘明, 蔡佑林, 尹晓辉, 冯超. 基于人工神经网络和遗传算法的喷水推进泵叶轮和导叶匹配优化方法研究[J]. 船舶, 2023, 34(06): 65-72.
[7]	蔡佑林, 张恒, 陈刚, 邱继涛, 汲国瑞, 王建强. 面向中低速船的浸没式喷水推进技术[J]. 船舶, 2023, 34(03): 92-96.
[8]	张恒, 王仁智, 蔡佑林, 于存银. 喷射流浸没深度对喷水推进尾迹场的影响分析[J]. 船舶, 2022, 33(03): 20-27.
[9]	章泉, 王朝. 25 m沿海高速客船破损稳性分析[J]. 船舶, 2022, 33(01): 57-65.
[10]	袁金永, 杨帆. 高速巡逻船湿式排气系统设计[J]. 船舶, 2021, 32(04): 94-99.
[11]	赵振华, 袁帅, 刘志强. 船舶锚系三维交互设计技术研究[J]. 船舶, 2020, 31(01): 71-78.
[12]	邬卡佳, 田华勇. 浅析排水式高速艇的阻力性能[J]. 船舶, 2019, 30(03): 97-103.
[13]	陈建平;夏丁良;朱健申;王宗龙;. 超高速自由液面循环水槽高品质测试流场技术[J]. 船舶, 2019, 30(02): 85-92.
[14]	戴原星;张志远;刘建国;王金宝;. 喷水推进三体船阻力与自航数值模拟研究[J]. 船舶, 2019, 30(01): 105-111.
[15]	徐绍衡;. 超大压缩的远程大数据传输智能平台AUTONET[J]. 船舶, 2018, 29(S1): 79-86.